Description

Sinopec L-HV Low Temperature HVI 22 High Viscosity Hydraulic Oil is a premium quality antiwear lubricant blended using high viscosity index base oils, combined with a multifunctional additive system to create an inherently synthetic, high viscosity hydraulic oil with low pour point characteristics. Non-conductive, designed to meet the requirements 35KV dielectric oil. Excellent performance of moderate to high pressure hydraulic systems for 6,000 of operating hours even in outdoors and cold regions, or where there is a wide variation in ambient temperature.

High cleanliness oil rated at ISO - 18/16/13 or NAS - 7

Pack Size: 55 Gallon Drum (200L Volume), Grade: ISO 22

Features & Benefits

Sinopec L-HV Low Temperature HVI 22 High Viscosity Hydraulic Oil is suitable for use in:

Moderate- to high-pressure hydraulic systems operating outdoors in severe cold regions or where there is a wide
variation in ambient temperature, such as in the marine, construction, mining and oil-industries.
Vane and gear pumps operating under high pressure and low temperatures, as recommended by pump manufacturers.

Severe service hydraulic systems, employing axial and radial piston pumps, as recommended by pump manufacturers.

Features & Benefits

High viscosity index combined with low pour point ensures excellent low-temperature fluidity and provides excellent low-temperature start up, protecting the hydraulic system from wear and extending life.
Excellent shear stability properties ensure good oil film thickness is maintained in severe service conditions, protecting the components of the hydraulic system.
High-quality base oils combined with multifunctional additive technology provide outstanding antiwear properties, rust protection, low varnish and deposit formation, excellent demulsibility, oxidation resistance, good antifoam properties and fast air release properties, to protect and extend the life of hydraulic pumps and systems.
Good hydrolytic stability and filterability, ensure optimum product life and performance, and prevent filter blocking.
The wide selection of viscosity grades ensures that the optimum viscosity can be used for any hydraulic system operating temperature.
Fully compatible with common seal materials usually found in hydraulic systems, to extend seal life and prevent fluid leakage.

Specifications

Sinopec L-HV Low Temperature HVI 22 High Viscosity Hydraulic Oil Typical Data Specifications

ISO viscosity grade (VG)	22
Kinematic viscosity, ASTM D 445 cSt @ 40℃ cSt @ 100℃	21.93 5.06
Viscosity index, ASTM D 2270	173
Air release at 50℃, mins, ASTM D 3427	2.0
Foaming characteristics, sequences 1, 2 and 3, ASTM D 892	10/0 15/0 10/0
Neutralisation number, mg KOH/g, ASTM D 974	0.53
Rust prevention, ASTM D 665 distilled water synthetic sea water	pass pass
FZG test (A/8.3/90), fail load stage, DIN 51345	12
Dielectric Strength, ASTM D877, kV	35
TOST, ASTM D943-04a, hours	>5,000
Copper corrosion, 3 hours @ 100℃, ASTM D 130	1b
Water separability, ASTM D 2711	6 (54℃)
Pour point, ℃, ASTM D 97	-42
Flash point (COC), °C, ASTM D 92	178

Sinopec L-HV Low Temperature HVI 22 High Viscosity Hydraulic Oil meets or exceeds the performance requirements of the following industry specifications:

DIN	51524 Pt 3 (HVLP)
GB1	11118.1-84 (L-HV)
ISO	ISO 6743/4 (L-HV), ISO 4406:2017 18/16/13 (NAS 7)

Sinopec L-HV Low Temperature HVI 32 High Viscosity Hydraulic Oil meets or exceeds the performance requirements of the following OEM specifications:

Cincinnati	P-68
Parker Denison	HF-0

Cross Reference

Shell Tellus S2 VX22
Mobil DTE 10 Excel 22
Chevron Rando HDZ 22

Additional shipping fess will apply to residential, limited access, deliveries outside the regular delivery network or locations requiring a lift gate to complete delivery.