HEAT TRANSFER OIL | DIN 51522 | ISO 6743-12 Family Q | 55 GALLON DRUM
Heat Transfer Oil | 55-Gallon Drum | Price: $575.00 | Free Shipping | Sinopec L-QB330 Heat Transfer Oil Compare to Mobil Therm 603, Shell Heat Transfer S2X, Chevron Heat Transfer Oils.
L-QB330 a premium quality heat transfer fluid for use in indirectly heated closed heat transfer systems. It is based on carefully selected highly refined mineral oils chosen for their ability to provide superior performance in heat transfer systems and contains an oxidation inhibitor to provide long service life.
• Industrial heat transfer systems
For use in closed heat transfer systems used in chemical and process plant, textile manufacture etc. where the oil is circulated in a pumped system operating under atmospheric pressure with or without an inert gas blanket.
Sinopec Heat Transfer Oil can be used in high temperature continuous heat transfer equipment with the following application limits:
Performance Features and Benefits
• Extended maintenance intervals
Sinopec Heat Transfer Oil is based on carefully selected highly refined mineral oils and resists oil cracking, oxidation and thickening. This provides extended oil life, provided efficient fluid heating and good pump circulation is ensured, such that film temperatures on the heater surface do not exceed the limits above.
• System efficiency
Low viscosity enables excellent fluidity and heat transfer over a wide temperature range.
Sinopec Heat Transfer Oil also has a low vapour pressure so resists cracking. This minimises the formation of volatile decomposition products; these would require recovery via expansion chamber and condensate collector
• Wear protection
Sinopec Heat Transfer Oil is non-corrosive and has high solvency – this reduces deposit formation by holding oxidation products in solution and keeping internal surfaces of heat exchangers clean.
Specification and Approvals
Classified under ISO 6743-12 Family Q
Meets DIN 51522 requirements