Sinopec Multipurpose Red Lithium Grease is tacky multipurpose grease ideal for general lubrication in industrial and automotive (trucks, cars and buses) applications, especially for lubrication of chassis points, automotive wheel bearings and 5th wheels. Excellent structural stability, long services life and excellent resistance to corrosion and oxidation to protect machinery from wear and tear. Appearance red and stringy.NLGI No. 2.
Features & Benefits
Sinopec Red Multipurpose Lithium Grease, NLGI 2 is suitable for use in:
A wide range of industrial and automotive applications, where there is no requirement for load carrying properties.
Lubrication of chassis points (e.g. shackles, tie rod ends, steering knuckles, control arms and king pins), electric motors and water pumps of passengers cars, buses and trucks.
General lubrication of roller bearings and sliding bearings operating under light load.
Features and Benefits
Lithium soap thickener ensures good mechanical stability, so the grease structure does not soften or break down in service.
Excellent water resistance means that the grease stays in place and is not washed or sprayed off in wet conditions, reducing the need for frequent re-application.
Protection against rusting and corrosion ensures long component life, and extends maintenance intervals.
Good oxidation stability ensures longer grease life, providing optimum lubrication, extending equipment life and reducing maintenance requirements.
Added polymer ensures the grease adheres strongly to metal surfaces, sealing out water, dirt and abrasive materials, and so protecting the moving parts.
Specifications
Sinopec Red MP Grease Specifications
NLGI grade
2
Appearance, visual
Smooth, red, buttery
Thickener type
Lithium
Base fluid type
Mineral
Kinematic viscosity, ASTM D 445
cSt @ 100°C (range)
9–12
Cone penetration, ASTM D 217
W×60, mm–1
W×100,000, mm–1
278
288
Dropping point, °C, ASTM D 566
195
Oil separation, 24 h @ 100°C, %, FTMS 791C-321.3
4.5
Low temperature torque (–15°C), Nm, ASTM D1478
Starting torque, Nm
Running torque, Nm
0.086
0.054
Water washout, 1 h @ 38°C, %, ASTM D 1264
2
Oxidation stability, 100 h @ 99°C & 758 kPa, pressure drop, kPa, ASTM D 942
10
Copper corrosion, T2 copper strip, 24 h @ 100°C, rating, ASTM D 4048
pass
Corrosion prevention, 48 h @ 52°C, rating, ASTM D 1743
pass
Impurities, quantity/cm3 , JIS K2220 5.9
10 µm or larger
25 µm or larger
75 µm or larger
125 µm or larger
200
80
0
0
Sinopec MP Grease meets the performance requirements of the following industry specification:
Sinopec
Q/SH303 242-2007
Sinopec MP Grease holds the following formal OEM approval:
Ship to Store Locations 
