Description
ATF HD S Automatic Transmission Fluid is designed for severe duty and extended drain intervals. It is recommended for any application that calls for the Allison TES-295 and Allison TES-389™ performance levels. It has been field tested in several urban transit fleets with excellent results for drain intervals ranging from 50,000 to 100,000 miles. It is manufactured from high viscosity synthetic base oils and additives that help provide oxidation and thermal stability, friction control, load-carrying ability, corrosion and wear protection. It helps prevent the accumulation of deposits and the formation of sludge, varnish, and foam. It is also an excellent choice for passenger cars and light trucks requiring General Motors DEXRON®-III,1 as well as Ford MERCON® and MERCON® V,2 especially for those vehicles in moderate to severe service. Examples of severe service applications include police cars, taxicabs, pickup & delivery trucks, recreational vehicles, and tow trucks.
Pack Size: 55 Gallon Drum (200L Volume)
Features & Benefits
Sinopec ATF HD S Automatic Transmission Fluid is suitable for use in:
- On and off-highway heavy duty automatic transmission where GM DEXRON® VI / III-H or Allison TES 295 quality fluid is required.
- Automatic transmission systems of commercial vehicles, including bus rapid transit (BRT) fleets, school bus fleets, emergency vehicles, recreation vehicles and commercial utility vehicles, where extended drain intervals are required.
- Passenger cars automatic transmission.
- Power steering and hydraulic systems in light and heavy-duty vehicles. • Hydrostatic drives and hydraulic power transmission systems in industrial, agricultural, mining and marine applications where a GM DEXRON® III-H, II-D or Ford MERCON® quality fluid is specified.
Features and Benefits
- Outstanding oxidation stability, thermal stability and detergency ensure long fluid life and prevent the build up of deposits.
- Excellent frictional characteristics improve transmission efficiency and shifting performance, and ensure consistent, reliable, trouble-free operation of transmission systems.
- Excellent antiwear performance and good oil film strength protect components from wear and ensure long transmission life.
- Very good low-temperature properties protect against wear under cold start-up and running conditions and ensure good low-temperature shift performance.
- Effective control of foaming ensures good transfer of power and shifting performance, and reduces fluid loss in severe service conditions.
- Fully compatible with common seal materials found in transmission systems, to extend seal life and prevent fluid leakage.
Specifications
| Property |
Typical data |
Test Method |
| Appearance |
Red |
ASTM D1500 |
| Kinetic viscosity (100℃)，mm2/s |
7.21 |
ASTM D 445 |
| Low temperature viscosity（–20℃）, mPa s |
1120 |
ASTM D 2983 |
| Low temperature viscosity（–40℃）, mPa·s |
12000 |
ASTM D 2983 |
| Flash point (COC), ℃ |
204 |
ASTM D 92 |
Sinopec ATF HD S Automatic Transmission Fluid has been formally approved:
| ZF |
TE-ML 04D,TE-ML 14B,TE-ML 16L,TE-ML 16R,TE-ML 20B |
| Volvo |
97341 |
| Voith |
H556336.XX（extended drain） |
| JASO(self-certified) |
JASO M315 1A |
Sinopec ATF HD S Automatic Transmission Fluid meets the performance requirements of the following commercial vehicle specifications:
| Allison |
C-4，TES-389，TES-295 |
| MAN |
339Type L-1,V1,Z1,V2,Z-2,Z-11 |
| MB |
MB 236.1, 236.2, 236.3, 236.6,236.7, 236.9, 236.11, 236.81, 236.91 |
| Voith |
H556335.XX ,H556336.XX |
| Volvo |
97340, 97341 |
| ZF |
TE-ML 03D,TE-ML 04D, TE-ML 05L,TE-ML 14B,TE-ML 16L,TE-ML 16R, TE-ML 17C,TE-ML 20B |
Sinopec ATF HD S Automatic Transmission Fluid meets the performance requirements of the following passenger vehicle specifications:
| GM |
DEXRON IID，IIIG，IIIH |
| Ford |
MERCON V ，FNR5 |
| Aisin |
JWS 3309 (T-IV ), AW-1（Low Viscosity） |
| Toyota |
T,T-II,T-III,T-IV, （Low Viscosity:WS,JWS3324) |
| Honda |
ATF Z-1, DW-1 (Low Viscosity ,except in CVTs) |
| Mazda |
ATF M-III, M-V |
| Mitsubishi |
ATF-J2/Diaqueen J2, (Low Viscosity: J3,SP-IV) |
| Hyundai/Kia |
SP-II,SP-III ,JWS3314,JWS3317, (Low Viscosity: SP-VI, SPH-IV,SP-IVRR,SP4-M,NWS-9638) |
| Kia |
Red-1 |
| Subraru |
ATF,ATF-HP |
| Suzuki |
3314,3317 |
| Audi/VW |
G052 162, G052 990,G 055 025(Low Viscosity: G 055 005, G 055 162,G 05 540) |
| BMW |
BMW 7045E(3 series),BMW 5 Series,LA2534,LT71141,BMW83220142516(Low Viscosity) |
| Nissan |
Nissan 402,Matic-D,J, K, (Low Viscosity: Matic-S,W) |
| MB |
MB 236.1, 236.2, 236.3, 236.6,236.7, 236.9, 236.11, 236.81, 236.10(NAG 1/shell 3403), (Low viscosity: MB 236.12,236.14) |
| ZF |
TE-ML 09, 11(3/4/5speed), ZF 6speed(Low viscosity) |
| PSA |
PSA AL-4 |
| Renault |
Renault DP-0 |
| Volvo |
Volvo 4speed（P/N 1161621）,P/N 1161540/1161640+,(Low viscosity:P/N 31256774 or P/N31256675) |
| Others |
Idemitsu K17(JATCO),Texaco N402(JATCO),ETL-7045E(BMW 7045E),ETL-8072B(BMW 5 Series) |
Cross Reference
- Mobil Delvac Synthetic ATF
- Shell Spirax S6 ATF A295
- Chevron Delo Syn ATF HD
Additional shipping fess will apply to residential, limited access, deliveries outside the regular delivery network or locations requiring a lift gate to complete delivery.
