Sinopec Antiwear Hydraulic Oil L-HM is a line of premium quality antiwear lubricants blended using selected and carefully refined high-quality mineral oils, combined with a multifunctional additive system and available in a wide viscosity range from ISO Grade 32 to 150. This line of oils has been designed to meet the requirements of major hydraulic pump manufacturers, and its applications include hydraulic systems used in industrial and marine applications as well as in mobile machinery.
Pack Size: 275 Gallon Drum (1000L Volume), Grade: ISO 46
Features & Benefits
Sinopec L-HM 46 Anti-wear Hydraulic Oil Fluid is suitable for use in:
Hydraulic applications in a wide variety of industrial, marine and mobile equipment.
Vane and gear pumps operating under high loads, as recommended by pump manufacturers.
Severe service hydraulic systems, employing axial and radial piston pumps, as recommended by pump manufacturers.
Features & Benefits
High-quality base oils combined with multifunctional additive technology provide outstanding antiwear properties, rust protection, low varnish and deposit formation, good demulsibility, oxidation resistance, good antifoam properties and fast air release properties, to protect and extend the life of hydraulic pumps and systems.
Good hydrolytic stability and filterability, ensure optimum product life and performance, and prevent filter blocking.
The wide selection of viscosity grades ensures that the optimum viscosity can be used for any hydraulic system operating temperature.
Fully compatible with common seal materials usually found in hydraulic systems, to extend seal life and prevent fluid leakage.
Specifications
Sinopec Antiwear Hydraulic Oil L-HM Typical Data Specifications
Foaming characteristics, sequences 1, 2 and 3, ASTM D 892
10/0 10/0 20/0
Neutralisation number, mg KOH/g, ASTM D 974
0.72
Rust prevention, ASTM D 665 distilled water synthetic sea water
pass pass
Copper corrosion, 3 hours @ 100℃, ASTM D 130
1b
Water separability, ASTM D 2711
15(54℃)
Pour point, ℃, ASTM D 97
-15
Sinopec Antiwear Hydraulic Oil meets or exceeds the performance requirements of the following industry specifications:
DIN
51524 Pt 2
GB
11118.1 -2011(L-HM, High Pressure)
ISO
11158 (L-HM)
Sinopec Antiwear Hydraulic Oil meets or exceeds the performance requirements of the following OEM specifications:
Cincinnati
P-68 (ISO 32), P-69 (ISO 68), P-70 (ISO 46)
Parker Denison
HF-0, HF-1, HF-2 (ISO 32, ISO 46, ISO 68)
Eaton Vickers
M-2950-S (ISO 46)
Buy on Wal-Mart
Cross Reference
Mobil Hydraulic AW 46
Mobil DTE Hydraulic Oil Medium
Mobil DTE 25
Shell AW Hydraulic 46
Shell Tellus MX 46
Shell Tellus M 46
Shell Tellus 46
Shell Tellus 26
Shell Tellus 929
Shell Tellus T 46
Shell Tellus S 46
Chevron AW Hydraulic HD 46
Chevron AW Machine Oil 46
Chevron AW Machine Oil 46
Chevron Rando HD 46
Chevron Rykon Oil AW 46
Chevron Rykon Oil 46
Exxon Univis J-27
Exxon Univis N-46
Exxon Humble Hydraulic 1194
Exxon Humble Hydraulic H46
Exxon Humble Hydraulic H48
Exxon Nuto H46
Exxon Nuto H48
Terrastic EP 46
Concoco Super Hydraulic 46
Phillips 66 Megaflow AW Hydraulic Oil 46
Also referred to as: AW 46 Hydraulic Oil, AW 46 Hydraulic Fluid, ISO VG 46 Hydraulic Oil, ISO VG 46 Hydraulic Fluid, ISO 46 Hydraulic Oil, ISO 46 Hydraulic Fluid, Grade 46 Hydraulic Oil, Grade 46 Hydraulic Fluid
FAQs
Can I use this product in place of Mobil DTE 25?
Yes, this product can be used as a replacement for Mobil DTE 25 hydraulic oIl.
What color is this oil?
The hydraulic oil oil is a light petroleum color.
How does this ship?
This product ships via LTL Freight Carrier. If you are unsure if your location can support freight deliveries, please call the shipping department at (885) 405-6789 ext. 604 or visit the Shipping Information page.
I need this today, can I pick it up?
Same day pickup is available from Toms River, NJ, Ontario, CA, Jacksonville, FL and Houston, TX. Orders typically take 24 hours to process, so if you need to pick up today, please callshipping department at (885) 405-6789 ext. 604 to expedite your order.