Sinopec ATF HD S Automatic Transmission Fluid is designed for severe duty and extended drain intervals. It is recommended for any application that calls for the Allison TES-295 and Allison TES-389™ performance levels. It has been field tested in several urban transit fleets with excellent results for drain intervals ranging from 50,000 to 100,000 miles. It is manufactured from high viscosity synthetic base oils and additives that help provide oxidation and thermal stability, friction control, load-carrying ability, corrosion and wear protection. It helps prevent the accumulation of deposits and the formation of sludge, varnish, and foam. It is also an excellent choice for passenger cars and light trucks requiring General Motors DEXRON®-III,1 as well as Ford MERCON® and MERCON® V,2 especially for those vehicles in moderate to severe service. Examples of severe service applications include police cars, taxicabs, pickup & delivery trucks, recreational vehicles, and tow trucks.
Features & Benefits
Sinopec ATF HD S Automatic Transmission Fluid is suitable for use in:
On and off-highway heavy duty automatic transmission where GM DEXRON® VI / III-H or Allison TES 295 quality fluid is required.
Automatic transmission systems of commercial vehicles, including bus rapid transit (BRT) fleets, school bus fleets, emergency vehicles, recreation vehicles and commercial utility vehicles, where extended drain intervals are required.
Passenger cars automatic transmission.
Power steering and hydraulic systems in light and heavy-duty vehicles. • Hydrostatic drives and hydraulic power transmission systems in industrial, agricultural, mining and marine applications where a GM DEXRON® III-H, II-D or Ford MERCON® quality fluid is specified.
Features and Benefits
Outstanding oxidation stability, thermal stability and detergency ensure long fluid life and prevent the build up of deposits.
Excellent frictional characteristics improve transmission efficiency and shifting performance, and ensure consistent, reliable, trouble-free operation of transmission systems.
Excellent antiwear performance and good oil film strength protect components from wear and ensure long transmission life.
Very good low-temperature properties protect against wear under cold start-up and running conditions and ensure good low-temperature shift performance.
Effective control of foaming ensures good transfer of power and shifting performance, and reduces fluid loss in severe service conditions.
Fully compatible with common seal materials found in transmission systems, to extend seal life and prevent fluid leakage.
Specifications
Property
Typical data
Test Method
Appearance
Red
ASTM D1500
Kinetic viscosity (100℃)，mm2/s
7.21
ASTM D 445
Low temperature viscosity（–20℃）, mPa s
1120
ASTM D 2983
Low temperature viscosity（–40℃）, mPa·s
12000
ASTM D 2983
Flash point (COC), ℃
204
ASTM D 92
Sinopec ATF HD S Automatic Transmission Fluid has been formally approved:
ZF
TE-ML 04D,TE-ML 14B,TE-ML 16L,TE-ML 16R,TE-ML 20B
Volvo
97341
Voith
H556336.XX（extended drain）
JASO(self-certified)
JASO M315 1A
Sinopec ATF HD S Automatic Transmission Fluid meets the performance requirements of the following commercial vehicle specifications:
Ship to Store Locations 
